Product Part Number: 257L059
PC Form Factor: Full-length PCI
TDM Bus Type: H.100
Bus Capacities:
H.100 - 4096 timeslots
Analog Ports - 8
The E&M line interface board contains eight ports, each capable of 2-wire or 4-wire operation, using type I or type V signaling protocols. Signalling protocols and port types are programmed on a per-port basis. Individual ports may also be programmed for Radio Interface operation, allowing independent control of the E&M signalling leads on the application level. On-board DSP resources include DTMF detection and generation, as well as energy detection, North American / European call progress tones, and a 1004Hz calibration tone. Thirty-two independent bi-directional voice resource channels are also included.
Downloads:
XDS H.100 2/4-wire E&M technical manual
Additional Product Specifications
|
Analog Interface: |
|
| Ports: | 8 |
| Signalling: | Type I / Type V (software configurable) |
| Port Types: | 2-wire, 4-wire, Radio Interface |
| Connector: | RJ21 |
|
DSP Resources: |
|
| DTMF Detector | (each port) |
| Energy Detector | (each port) |
| DTMF Generator | (each port) |
| Call Progress Tone Generation | (each port) |
| 1004Hz Calibration Tone Generation | |
|
Transceiver Support: |
|
| Programmable echo suppression | |
| PTT using M-lead to key transmitter upon energy detection | |
| 2100Hz tone detection to disable echo suppression on modem connections | |
|
Temperature Extremes: |
|
| Operating: | 0°C (+32°F) to +50°C (+122°F) |
| Storage: | -40°C (-40°F) to +70°C (+158°F) |
|
Ambient Humidity: |
Designed to withstand ambient relative humidity from 0% to 95% non-condensing in both operating and storage conditions. |
| Other: | |
| Mechanical: | Designed to conform to PCI-SIG® mechanical specifications for full-length PCI cards. |
| MTBF: | 50,000 hours |
| Electrical Requirements: | +5 volts +5% @ 1.5 amps maximum +12 volts, +3 volts, and -5 volts are not required -48 volts maximum current per port 30mA |