Product Part Number:
259L005 : 4-Span T1 Interface Board
259L002 : 8-Span T1 Interface Board
PC Form Factor: Full Length PCIe
TDM Bus Type: H.100
Digital Line Interface: Primary Rate ISDN / T1 Spans
The XDS 4-span and 8-span T1/PRI boards offer a selectable 75ohm/120ohm E1 interface or a 100ohm T1 interface. Call progress tone generation and DTMF tone generation/detection are supported. Status LEDs are provided on each port for red, yellow, and blue alarm conditions. D4 and ESF signaling are supported for T1 interfaces. Primary Rate ISDN is supported, including access to either layer 2 or layer 3 from the application level. Driver support includes Linux RedHat, Windows 2000 / XP / NT, Gentoo, Fedora, and an Asterisk channel driver.
T1/PRI interface boards include 128 channels of bi-directional voice resources (4-span boards) or 256 channels of voice resources (8-span boards), as well as two analog inputs for music-on-hold applications.
The 4-span T1/PRI interface boards also include 128 ports of enhanced conferencing.
Downloads:
H.100 T1/Primary Rate ISDN technical manual
Additional Product Specifications
|
PRI Interfaces: |
|
| (23 B channels + 1 D channel) x 8 spans | |
| Each span is software selectable as Network Termination (NT) or Terminal Equipment (TE) | |
|
T1 Interfaces: |
|
| (24 channels) x 8 spans | |
| Each span is software selectable as Customer Premise Equipment (CPE) or Central Office (CO) | |
|
Framing: |
|
|
All options are software selectable (per port) |
|
| T1 Framing: | D4, ESF |
| T1 Zero Suppression: | AMI, B8ZS |
| T1 Signaling: | Robbed Bit, PRI |
|
Line Protocols: |
|
| T1 Line Type: | E&M, Ground Start, Loop Start |
| Direction: | FXO, FSX |
| Optional Address Protocol: | Immediate Start, Wink Start |
|
PRI Signaling Protocols: |
|
| Layer 2 and Layer 3 messaging | supported |
| Layer 3 protocol stacks: | NI-1, elements of NI-2 and NI-3, ANSI T1.407, ANSI T1.410, ETSI 102 |
|
DSP Resources: |
|
| DTMF Detector | (each B channel) |
| Energy Detector (each B channel) | (each B channel) |
| DTMF Generator | (each B channel for signaling) |
| Call Progress Tone Generation (each B channel) | (each B channel) |
| 1004Hz Calibration Tone Generation | |
|
Voice Resources: |
|
| Channels: | 128 or 256 (for 4-span or 8-span boards, respectively) |
| Audio file formats supported: | A-law, Mu-law, 6/8kHz ADPCM, .WAV, 16-bit linear PCM |
| Playback Halt Upon DTMF Detection: | Supported |
|
Conference Resources (4-span boards): |
|
| 4-span T1/PRI interface boards include 128 ports of enhanced conferencing with DTMF tone clamping. | |
|
Music-On-Hold Ports: |
|
| T1/PRI interface boards include two analog input ports for music-on-hold applications | |
|
MVIP/SCSA Legacy Mode: |
|
| Legacy modes are initialized via software to adjust TDM clocks to 2.048MHz (MVIP) or 4.096MHz (SCSA) accordingly. | |
|
Temperature Extremes: |
|
| Operating: | 0°C (+32°F) to +50°C (+122°F) |
| Storage: | -40°C (-40°F) to +70°C (+158°F) |
|
Ambient Humidity: |
Designed to withstand ambient relative humidity from 0% to 95% non-condensing in both operating and storage conditions. |
| Other: | |
|
Mechanical: |
Designed to conform to PCIe-SIG mechanical specifications for full-length PCIe cards. |
|
MTBF: |
50,000 hours |
|
Electrical Requirements: |
+5 volts +5% @ 1.5 amps maximum +12 volts, +3 volts, and -5 volts are not required. |