Product Part Number: 259L031
PC Form Factor: Full Length PCIe
TDM Bus Type: H.100
Bus Capacities:
H.100 - 4096 timeslots
Analog Ports - 24
The H.100 PCIe station board provides twenty-four ports, each providing a complete interface for a standard telephone device. The board is capable of generating ringing internally, with a wide variety of ring cadences supported for North American and European standards. The board supports Caller ID with Calling Number and Calling Name Delivery as well as the visual Message Waiting Indication feature. Internal DSPs provide DTMF detection and generation, energy detection, and call progress tone generation, as well as thirty-two independent bi-directional voice resource channels. Programmable hook flash and disconnect detection are supported.
Ports initialized as DID line interfaces implement RS-464 and IEEE standard protocols, including wink and immediate start, as well as DTMF and MF-R1 tone detection.
Downloads:
XDS H.100 High-Density Station Board / DID board technical manual
Additional Product Specifications
Analog Interface: |
|
Ports: | 24 |
Connector: | RJ21 |
DSP Resources: |
|
DTMF Detector | (each port) |
Energy Detector | (each port) |
DTMF Generator | (each port) |
North American and European Call Progress Tone Generation | |
1004Hz Calibration Tone Generation | |
Caller Identity: |
|
Calling Number Delivery: | supported |
Calling Name Delivery: | supported |
Calling Identity Delivery on Call Waiting: | supported |
Additional: |
|
Custom tone generation: | supported |
Programmable Hook-Flash detection: | supported |
Programmable Call Waiting Detection: | supported |
Adjustable Gain Control: | supported, per port |
MVIP/SCSA TDM legacy modes: | supported |
Temperature Extremes: |
|
Operating: |
0°C (+32°F) to +50°C (+122°F) |
Storage: | -40°C (-40°F) to +70°C (+158°F) |
Ambient Humidity: |
Designed to withstand ambient relative humidity from 0% to 95% non-condensing in both operating and storage conditions. |
Other: | |
Mechanical: |
Designed to conform to PIC-SIG® mechanical specifications for full-length PCI cards. |
MTBF: |
50,000 hours |
Electrical Requirements: |
+5 volts +5% @ 1.5 amps maximum +12 volts, +3 volts, and -5 volts are not required Primary Battery (-24 or -48 volts) maximum current per port 30mA Auxiliary Battery typically less than 15mA per port |