Product Part Number:
259L017 : 4-Span E1 Interface Board
259L014 : 8-Span E1 Interface Board
PC Form Factor: Full Length PCIe
TDM Bus Type: H.100
Digital Line Interface: Primary Rate EuroISDN / E1 Spans
The XDS 4-span and 8-span E1/PRA boards offer a selectable 75ohm/120ohm E1 interface. Call progress tone generation and DTMF tone generation/detection are supported. Status LEDs are provided on each port for red, yellow, and blue alarm conditions. CRC4 and non-CRC4 signaling are supported for E1 interfaces. Primary Rate EuroISDN is supported, including access to either layer 2 or layer 3 from the application level. Driver support includes Linux RedHat, Windows 2000 / XP / NT, Gentoo, Fedora, Debian, and an Asterisk channel driver.
E1/PRA interface boards include 128 channels of bi-directional voice resources (4-span boards) or 256 channels of voice resources (8-span boards), as well as two analog inputs for music-on-hold applications.
The 4-span E1/PRA interface boards also include 128 ports of enhanced conferencing.
Additional Product Specifications
|
PRA Interfaces: |
|
| (30 B channels + 1 D channel) x 8 spans | |
| Each span is software selectable as Network Termination (NT) or Terminal Equipment (TE) | |
|
E1 Interfaces: |
|
| (30 channels) x 8 spans | |
| Each span is software selectable as Customer Premise Equipment (CPE) or Central Office (CO) | |
|
Framing: |
|
| All options are software selectable (per port) | |
| E1 Framing: | CRC4, non-CRC4 |
| E1 Zero Suppression: | AMI, HDB3 |
| E1 Signaling: | CAS, PRA |
|
Line Protocols: |
|
| E1 CAS Line Type: | E&M, Ground Start, Loop Start, Q.421 |
| Direction: | FXO, FSX |
| Optional Address Protocol: | Immediate Start, Wink Start |
|
PRA Signaling Protocols |
|
| Layer 2 and Layer 3 messaging: | supported |
| Layer 3 protocol stacks: | EuroISDN |
|
DSP Resources: |
|
| DTMF Detector | (each B channel) |
| Energy Detector | (each B channel) |
| DTMF Generator | (each B channel for signaling) |
| Call Progress Tone Generation | (each B channel) |
| 1004Hz Calibration Tone Generation | |
|
Voice Resources: |
|
| Channels: | 128 or 256 (for 4-span or 8-span boards, respectively) |
| Audio file formats supported: | A-law, Mu-law, 6/8kHz ADPCM, .WAV, 16-bit linear PCM |
| Playback Halt Upon DTMF Detection: | Supported |
|
Conference Resources (4-span boards): |
|
| 4-span E1/PRA interface boards include 128 ports of enhanced conferencing with DTMF tone clamping. | |
|
Music-On-Hold Ports: |
|
| E1/PRA interface boards include two analog input ports for music-on-hold applications. | |
|
MVIP/SCSA Legacy Mode |
|
| Legacy modes are initialized via software to adjust TDM clocks to 2.048MHz (MVIP) or 4.096MHz (SCSA) accordingly. | |
|
Temperature Extremes: |
|
| Operating: | 0°C (+32°F) to +50°C (+122°F) |
| Storage: | -40°C (-40°F) to +70°C (+158°F) |
|
Ambient Humidity: |
Designed to withstand ambient relative humidity from 0% to 95% non-condensing in both operating and storage conditions. |
| Other: | |
|
Mechanical: |
Designed to conform to PCI-SIG mechanical specifications for full-length PCI cards. |
|
MTBF: |
50,000 hours |
|
Electrical Requirements: |
+5 volts +5% @ 1.5 amps maximum +12 volts, +3 volts, and -5 volts are not required. |